In the current search for renewable energy sources, residual biomass has gained ground in the concept of biorefinery. Furanic compounds such as 5-hydroxymethylfurfural (HMF), furfural (FF) and derivatives such as levulinic acid (LA), obtained from biomass, have emerged as important industrial chemical platforms. In this sense, this work aimed to use pequi bark, typical biomass and abundant in the Brazilian cerrado, in the production of HMF, FF and LA using the ionic liquid 1-n-butyl-3-methyl-imidazole bromide ([BMIM][Br]). The analysis of chemical composition of pequi bark showed that it has potential for use in the production of bioproducts, FF, HMF and LA, with yields of 65, 3 and 23.7%, respectively. High glucose conversion rates were found (> 90%). The analysis of variance (ANOVA) was applied to obtain the mathematical model with α = 0.05, verifying the significance of the second order model established for HMF (F = 0.00167) and FF (0.004494). The model fit is satisfactory, obtaining the coefficient of determination (R2) for the HMF and for the FF of 0.9599 and 0.08422, respectively. From the results obtained, it can be concluded that pequi bark has good precursor capacity for use in biorefinery processes.

The aims of the current study are to investigate the composition of biomass from baru processing and to explore the feasibility of valuing it through the development of bioproducts such as fermentable sugars, furanics and biochar. Baru (Dipteryx alata Vog.) waste (endocarp and mesocarp) has great energetic potential to produce bioproducts due to its chemical composition. Proximate analyses applied to such waste have found low favorable moisture and ash content in it. Bioproduct characterizations after acid hydrolysis have shown that baru endocarp and mesocarp biomass can enable a range of value-added products in biorefinery concepts such as furfural and 5-hydroximetylfurfural (20.0 and 1.5% yield, respectively), and high sugar content (approximately 19.15 and 38.40%, respectively). Pyrolysis processes also present high biochar content (ca. 48%), with satisfactory characteristics to be used as fuel, as well as calorific value higher than 30 kJ g-1.